Grex, H850LX 21 Ga 2" Brad Nailer

The Grex H850LX 21 Gauge 2" Brad Nailer is a precision tool designed for fine woodworking, cabinetry, and delicate trim work. It drives 21-gauge brad nails, which are thinner than the standard 18-gauge nails, making it ideal for detailed work where minimizing wood splitting and nail visibility is important.

Key Features:

1. 21-Gauge Brad Nails: Drives 21-gauge brads from 1/2" to 2" in length, providing a more subtle finish with reduced nail hole size.
2. Extended Reach: The ability to shoot 2-inch nails allows it to handle both delicate and more substantial trim work.
3. Power and Precision: Combines the power needed to penetrate hardwoods with the precision required for fine woodworking.
4. Lightweight Design: Weighs only 2.4 lbs, reducing fatigue during extended use.
5. No-Mar Tip: Protects the work surface from dents and damage, ensuring a clean finish.
6. Easy to Load: A rear-loading magazine simplifies reloading and minimizes downtime.
7. Quiet Operation: Designed for smooth, low-noise operation, making it suitable for indoor work.

Benefits:

• Minimal Surface Damage: Leaves smaller holes compared to 18-gauge brad nailers, reducing the need for filling.
• Versatile Applications: Suitable for a wide range of projects, from fine trims to heavier applications requiring longer nails.
• Reduced Jamming: Features a jam-resistant mechanism, ensuring smooth operation with minimal interruptions.
• Comfortable Grip: Ergonomically designed handle for comfort and control, even during long periods of use.
• Precision Control: The narrow nose design allows for accurate placement of nails, even in tight spots.

Applications:

• Trim and Molding: Perfect for installing delicate baseboards, crown molding, and window/door casings.
• Cabinetry: Ideal for attaching trim, panels, and moldings on cabinets with minimal damage.
• Furniture Assembly: Useful for assembling lightweight furniture pieces and attaching small trim pieces.
• Craft Projects: Suitable for small, detailed work where a clean finish is required.
• Finish Carpentry: Perfect for detailed finish work, including decorative trims and fine woodworking.

Recommended Usage:

• Nail Length Selection: Choose the appropriate brad length based on the material thickness to ensure proper holding power.
• Surface Protection: Use the no-mar tip to prevent damaging finished surfaces.
• Adjust Air Pressure: Adjust the air pressure according to the material you're working with for consistent nail driving.
• Safety Gear: Wear protective gear such as safety glasses to protect against flying debris.

Specifications:

• Gauge: 21-Gauge.
• Nail Length Capacity: 1/2" to 2".
• Magazine Capacity: Holds up to 100 brad nails.
• Operating Pressure: 60-100 PSI.
• Weight: 2.4 lbs.
• Material Compatibility: Works with softwood, hardwood, and MDF.

Example Products:

• Grex P650LX 23-Gauge Pin Nailer: Another fine woodworking tool from Grex, designed for ultra-thin 23-gauge pins.
• Bostitch BTFP12233 Brad Nailer: A 18-gauge brad nailer for heavier duty trim work.
• Senco FinishPro 21LXP: A 21-gauge brad nailer with similar capabilities, ideal for trim work.

Conclusion

The Grex H850LX 21 Gauge 2" Brad Nailer is a top-notch tool for professionals and hobbyists who demand precision and a high-quality finish. Its ability to drive 21-gauge nails up to 2 inches makes it perfect for delicate tasks like trim work, cabinetry, and fine woodworking. This nailer offers a balance of power, precision, and comfort, ensuring smooth and efficient operation in a wide range of applications.

Feature:

• One-Touch Over-Ride button allows use of the 7 remaining "reserve" pins
• Large powerful motor for consistent drive power into hardwoods
• Auto Lock-Out prevents dry-firing and project damage
• Auto Lock-Out over-ride button allows use of the remaining pins
• On-Board adjustable Edge Guide to work faster and more precisely
• On-Board Edge Guide Holder for convenient storage when not in use
• Patented magazine self-adjusts for 14 different fastener lengths
• Narrow nose design for access to more tight areas and angles
• Precision machined aluminum cylinder and piston valve
• Drop-in fastener loading for quick and easy re-loading
• Fastener indicator window shows nail supply; alerting operator to reload
• Posit-Lock™ nose cover for tight tolerance and access to the pin chamber
• Swivel air coupler helps keep air hose tangle-free
• Rear exhaust with silencer reduces noise and directs exhaust air away
• Steel Belt hook keeps your tool at your side; left or right mounted
• No-mar rubber tip prevents marring of work surface
• No-mar guidelines for accurate nailing
• Rear magazine cap with hex wrench and spare no-mar tip storage
• Rubber handgrip for a firm comfortable grip

Specification:

Dimensions                         9.75"H x 9"L x 2"W (24.8 x 22.9 x 5 cm)
Weight                                3.6 lbs. (1.6 kgs.)
Operating Pressure             60 ~ 110 psi (4 ~ 7.6 bars)
Fastener Type                      21 Gauge Brads
Fastener Range                   3/8" ~ 2" (10mm ~ 50mm)
Fastener Capacity               1 strip (approx. 150 brads)
Air Inlet                               1/4" (6mm) NPT male plug